MODEL:  JBP-1000  100V/10A

* EASY,OPERATION , With JOG-DIAL * "LCD" DISPLAY ,BACK LIGHT * MEMORY STORE & RECALLl 100 POINTS * AUTO STEP RUNNING(MAX 100 FUNCTION) * TIME/SLOPE/COUNTER/OVP SETTING * OCP/OVP/OTP PROTECTION * WARNING SYSTEM MESSAGE * CONSTANT VOLATAGE & CURRENT OUT * HIGH STABILITY & HIGH ACCURACY * LOW DRIFT & LOW RIPPLE * V-SENSING FUNCTION * RS-232C / GP-IB INTERFACE (Option) * ANALOG INPUT (0~10V dc Remote Function) * EXTERNAL OUTPUT ON/OFF FUNCTION

MODEL                                   JBP-1000
MAX OUTPUT	0 ~ 100V / 0  – 10A
MAX WATT                                 1000W
Programmable  Accuracy	VOLTAGE： 0.06% +  60mV            CURRENT： 0.1% + 10mA
Ripple & Noise （20Hz-20MHz）	VOLTAGE（ms/p-p）:  15mV / 30mV ,    CURRENT: 10mA
Readback  Accuracy             VOLTAGE：  0.06% + 60mV                                                          CURRENT：  0.1% + 10mA
Load Regulation	VOLTAGE： 20mV                      CURRENT： 10mA
Line Regulation	VOLTAGE： 20mV                  CURRENT： 2mA
Control Resolution                VOTAGE： 10mV                                                                         CURRENT： 1mA
Auto Sequence (Dynamic)	Auto Run Step: Max 100 steps  Setting Time: 1ms – 50,000s(per 10us)  Slope Time: 1ms – 50s(per 10us)  Counter: 1 – 50,000 cycle (0 set : ∞)
Protection Setting	Over Voltage / Over Temperature(only heat sink 85℃)
Tansient Recovery Time       100us (50% load change, min load 0.5A)
Memory Address	Max. 100points(Voltage, Current , Time , Slope)
INTERFACE FOR PC	RS-232C，GP-IB OPTION
INPUT POWER                        AC 100V/120V/220V+10%, 230V +10%~ -6%, 50/60Hz
ACCESSORIES                      INPUT  POWER CORD x 1,  MANUAL x 1
SIZE                                           400(W) x 140(H) x  520(D) mm